Filter
Top Products
9
ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
(59) Front Stand
( Wider )
(61) Rear Stand
( Narrower )
SLOTS
The rubber feet of the AeroPilates Performer XP615 must fit into the FRONT STAND(59) and
the REAR STAND(61). The FRONT STAND(59) is wider than the REAR STAND(61). The Foot
Rest end of your AeroPilates
Performer XP615 will fit into the top of the FRONT STAND(59) and
the Headrest end of your AeroPilates Performer XP615 will fit into the REAR STAND(61).
STEP 5
Insert the FOAM PAD ASSEMBLIES(21) into the holes located on the CARRIAGE(12).
STEP 10
Place the Stand on the FLOOR MAT(66) as shown in the illustration.
To prevent the CARRIAGE(12) from moving while placing the AeroPilates Performer XP615 onto its
Stand, attach one of the TENSION CORDS(15) in the slots on the FRONT FRAME(1). Refer to the inset
drawing. Place the AeroPilates
Performer XP615 onto the Stand as shown in the illustration.
NOTE:
(66) Floor Mat