Filter
Top Products
LOAD ADJUSTMENT
The resistance of the CARRIAGE(12) can be adjusted by
securing the TENSION CORDS(15) in the slots located on
the FRONT FRAME(1). You can achieve various levels of
resistance by securing different numbers of the TENSION
CORDS(15) in the slots.
NOTE:
OPERATIONAL INSTRUCTIONS
10
ROPE LENGTH ADJUSTMENT
The ROPES(22) are wrapped on the HOOKS located on both
sides of the CARRIAGE(12). You can adjust the length
between the PULLEY ASSEMBLY(26) and the HAND
STRAP(24) by attaching the PLASTIC HOOKS(23) onto
different HOOKS.
Arm Function: To position the HAND STRAP(24) close
to the PULLEY ASSEMBLY(26), hook the PLASTIC
HOOK(23) onto the HOOKS which will shorten the
ROPE(22).
Leg Function: To achieve a full range of movement, hook
the PLASTIC HOOK(23) of the rope onto the desired A,
B, or C hook.
1.
2.
A
B
C
HEAD REST ADJUSTMENT
The HEAD REST(19) on the CARRIAGE(12) can be
positioned at an incline by simply pivoting the SUPPORT
BRACKET underneath the HEAD REST(19).
SUPPORT
BRACKET
SLOTS
Over time your TENSION CORDS(15) will relax. To
increase resistance in the TENSION CORDS(15),
stretch and re-tie the tension cords in a more taut
position.