Filter
Top Products
STORAGE
To store the AeroPilates Performer XP615 simply keep it in a clean dry place. The AeroPilates Performer
XP615 can be folded as illustrated for easy storage. Please follow the following process:
Remove the AeroPilates
Performer XP615 from its Stand. Refer to page 6 and revert the procedure
to disassemble the Stand for storage.
Remove the LOCKING KNOBS(55) and CARDIO REBOUNDER(56), or the FOOT REST(10), from the
FRONT FRAME(1). Refer to illustration 1.
Remove the TENSION CORDS(15) from the slots on the FRONT FRAME(1). Move the CARRIAGE
ASSEMBLY(18) back to the REAR FRAME(2). Refer to illustration 1.
Grasp and lift the U SHAPED HANDLE(9) to fold the AeroPilates
Performer XP615. Refer to
illustration 1.
1.
2.
3.
4.
2.
WARNING:
When folding or unfolding the AeroPilates Performer XP615,
keep all children away from the AeroPilates Performer XP615
and make sure your hands are clear of any folding or pinch point.
1.
The AeroPilates Performer XP615 will be positioned as
shown in illustration 2 after fold. Insert the LOCKING PIN(30)
into the hole in the REAR FRAME(2) to lock the frames in
folded position.
NOTE: The string for the LOCKING PIN(30) is not as long as
shown in illustration 2.
5.
11
U-SHAPED HANDLE(9)
Grasp and lift the
handle to fold.
Stand
Floor Mat