Filter
Top Products
8
STORAGE
To store the PILATES PREMIER simply keep it in a clean dry place.
Moving the
PILATES PREMIER: To prevent the CUSHION ASSEMBLY(10) from moving, attach
one of the
TENSION CORD ASSEMBLIES(12) in the slots on the FRONT FRAME(1). Lift up the
PILATES PREMIER from the Rear Stabilizer to move the PILATES PREMIER with the transport
wheels on the Front Stabilizer.
1.
2.
MAINTENANCE
The safety and integrity designed into the PILATES PREMIER can only be maintained when the PILATES
PREMIER is regularly examined for damage and wear. Special attention should be given to the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Worn or damaged components shall be replaced immediately or the
PILATES PREMIER removed
from service until repair is made.
Verify that the
ROPES(18) are properly installed on the PULLEY ASSEMBLYS(22).
Check the condition of the ROPES(18). Replace the Rope if it is cracked or broken.
Check the
PLASTIC HOOKS(19) on the ends of the ROPES(18). Replace the Ropes with deformed
or damaged hooks.
Check the
TENSION CORD ASSEMBLYS(12) for wear. Replace the Cords that are frayed or worn.
Check the pulleys for excessive wear. Replace worn pulleys.
Check and clean the rollers and the rolling surfaces on the rail. Clean by wiping with a dry cloth.
Only Stamina Products supplied components shall be used to maintain/repair the
PILATES PREMIER.
Keep your PILATES PREMIER clean by wiping with an absorbent cloth after use.