Filter
Top Products
2 3
ShrinQ
Sportline ShrinQ Pedometers have many unique features and functions. Please read all
sections of this manual carefully and become familiar with the operation of the pedometer
before using it in the field.
Proper setup and operation will greatly enhance the pedometer’s usefulness and your
enjoyment of the product.
The manual is divided into sections outlining each of the major functions of the pedometer.
A drawing of the screen that represents a starting point or other important point for each
operational process is shown adjacent to the instructions; important keys are shown
indicating
PRESS & HOLD and PRESS.
The steps for the programming or operation are adjacent to the screen illustration. Key points
and important information are shown in highlighted blocks.
NOTE: In order to activate your pedometer after purchase, you must remove the battery
insulator tab inside the battery compartment.
1. Unscrew the battery compartment door with a
small Phillips screwdriver.
2. Remove the tab (be sure that the battery is in
the correct polarity position – positive (+) side
of the battery is visible).
3. Replace the battery compartment door and
tighten the fastening screw with a Phillips
screwdriver.
4. Remove the label that appears on the
pedometer display.
HOW TO USE THIS MANUAL REMOVING THE BATTERY INSULATOR TAB
WV4407IS01SPTRA.indd Sec2:2-Sec2:3WV4407IS01SPTRA.indd Sec2:2-Sec2:3 4/16/14 2:32 PM4/16/14 2:32 PM