9
Elliptical T
rainer
XE395
1. Untie the wire on the Rod End Bearing; connect the Swing Arm (L) (10) with Connecting Arm (L) (8) and
secure with a Hex Head Bolt (79), Rod End Sleeve (22), a Flat Washer (100), and a Nyloc Nut (91). Tighten
using the wrenches provided (124 & 129).
2. Repeat the process for the Right Connecting Arm (R) (9) and Right Swing Arm (R) (11).
HARDWARE
STEP 3: Connecting Arm
#100. 5/16” x 20 x1.5T
Flat Washer
(2 pcs)
#91. 5/16” x 7T
Nyloc Nut
(2 pcs)
#79. 5/16” x 1-1/4” Hex
Head Bolt
( 2 Pcs)