Specialized ENDURO SL Bicycle Accessories User Manual


 
9
USA
FRADEUESP ITANLDPRTJPN
STUMPJUMPER/SAFIRE SHOCK SETUP
Set sag:1.
See the attached air chart for starting
pressure. Use a high-pressure shock pump
to adjust air.
Turn the Brain Fade knob (below) at least
one full turn counter-clockwise to allow
the shock to sag more easily, and set the
rebound to full fast (counter-clockwise).
Push the rubber o-ring up to the seal, sit
on the bike gently, dismount gently and
measure the distance between the shock
seal and the o-ring (sag).
Adjust air pressure until desired sag is
reached (This can be veried following the
steps on . p.6
or the measurements below
the air chart).
Air pressures and sag settings may vary
depending on rider style
and/or terrain.
Adjust rebound:2.
The red knob controls the rebound damping,
the rate which the shock returns after the shock
has been compressed.
Turn the knob clockwise for slower
rebound (slower speeds, bigger hits).
Turn the knob counter-clockwise for faster
rebound (higher speeds, small bumps,
more traction.
Higher air pressures and higher impacts
require more rebound damping (clockwise).
Tune Brain Fade inertia valve:3.
Brain Fade is an inertia valve system offering
a range of pedal platform efciency. The
blue knob controls the Trail Tune inertia valve
damping.
Turn the knob clockwise for a
firmer ride.
Turn the knob counter-clockwise
for a softer, more supple Trail
Tune setting.
Rider Weight
Air (PSI)
lbs (kg)
90-100 (41-45) 75-80
100-110 (45-50) 80-90
110-120 (50-54) 90-100
120-130 (54-60) 100-110
130-140 (60-64) 110-120
140-150 (64-68) 120-130
150-160 (68-73) 130-145
160-170 (73-77) 145-160
170-180 (77-82) 160-175
180-190 (82-86) 175-190
190-200 (86-91) 190-205
200-210 (91-95) 205-220
210-220 (95-100) 220-235
220-230 (100-104) 235-250
230-240 (104-109) 250-265
240-250 (109-113) 265-280
250-265 (113-120) 280-295
265-280 (120-127) 295-310
280-295 (127-134) 310-325
Eye-to-eye length: 185 mm
Shock stroke: 44.5 mm
Recommended sag: 22-28% (10-
12.5mm)
Travel: 120mm