Filter
Top Products
shortest interval that can be
set is 5 seconds.
10. Distance Countdown
(DISTÚ)
Your Turbo® Comp is
equipped with Distance
Countdown feature. This
allows you to set an alarm
when the selected mileage
is reached. To enter the
Distance Countdown mode,
press the “MODE” button
repeatedly until “DISTÚ”
appears in the Dot-matrix
Display Area. Note: if your
display says “INT, press the
“SET” button to change to
“DISTÚ” To set the Distance
Countdown, hold the “SET”
button for three seconds.
The hour digit will begin
flashing. Press the
“MODE” Button until the
desired number appears.
(Hold down the “Mode”
button to scroll quickly)
Press the “SET” button once
to set this number and
advance to minutes. Repeat
this process until minutes
and seconds are set to the
desired settings. Press the
“SET” button to exit pro-
gramming mode. Once
the time interval timer is
programmed, press the
“TOP” button to stop and
start the Distance
Countdown.
Note: The shortest
distance that can be set
is .01 miles/km.
COMPUTER
FUNCTIONS
Speedometer (SPEED)- Your
current speed is always dis-
played in large digits on the
top line of the LCD screen.
The speed is displayed up
to 99.9 M/h (99.9 Km/h)
with a resolution of 0.1
M/h (0.1 Km/h)
13
7. Interval Timer (INT)
Your Turbo® Comp is
equipped with an Interval
Timer. This feature allows
you to customize your train-
ing by integrating a pro-
grammable repeating count-
down timer into your work-
out. To enter the interval
timer mode, press the
“MODE button” repeatedly
until “INT” appears Dot
Matrix Display Area of the
screen. You are now in
interval timer mode. To set
the interval timer, hold the
“SET” button for three sec-
onds. The hour digit will
begin flashing. Press the
“MODE” Button until the
desired number appears.
(Hold down the “Mode”
button to scroll quickly) Press
the “SET” button once to set
this number and advance to
minutes. Repeat this process
until minutes and seconds
are set to the desired set-
tings. Press the “SET” but-
ton to exit programming
mode. Once the time inter-
val timer is programmed,
press the “TOP” button to
start/stop the countdown.
(See figure 15). Note: The
12
Average Speed (AVSPD)-
The Average Speed is
shown on the lower line
Digital Display Area up to
99.9 M/h (99.9 Km/h)
with a resolution of 0.1
M/h (0.1 Km/h)
The average speed is
based upon the ATM time.
The resolution of the aver-
age speed data on the
Digital Display Area is
shown in 0.1M/h or Km/h
increments. (See figure 16)
Maximum Speed (MXSPD)-
The Maximum Speed is
shown on the lower line of
the Digital Display Area up
to 99.9 M/h (99.9 Km/h)
with a resolution of 0.1
M/h (0.1 Km/h) The max-
FIGURE 15
FIGURE 16