Filter
Top Products
Display Area (This is called
the odometer mode). Next,
hold down the “SET” button
for three seconds. The “Km”
or “m” indicator will begin
blinking. You may now
alternate between miles and
kilometers by pressing the
“MODE” button. When the
correct choice is flashing,
select it by pressing the
“SET” button. You will now
enter the “Programmable
Odometer” mode. If the
odometer setting is correct
push the “SET” button five
times to exit odometer
mode. (Otherwise, see
“Setting the programmable
odometer” below).
3. Setting the
Programmable Odometer:
This mode is useful if you
have replaced the battery
and would like to retain the
mileage you have already
ridden. To access the
Programmable odometer
mode, first advance to the
Odometer Mode by press-
ing “MODE” button until
ODO appears in the Dot-
matrix Display Area. Hold
down the “SET” button for
three seconds (If you have
selected English language,
the Km/h indicator will
flash. If the Km/h setting is
correct press the “SET”
button once) and a five-
digit number will appear.
You are now in the pro-
grammable odometer
mode. To enter a mileage
into the odometer, press
the “MODE” button until
the flashing digit is correct.
(Note: The “MODE” button
may be held to quickly
scroll to the correct digit.)
Press the “SET” button to
select the next digit to the
right. Repeat this process
until all five digits are
entered as your existing
mileage. (See figure 7)
7
very easy to navigate. The
following flowchart outlines
the mode sequence. Once
a particular mode has
been entered, its values
can be reset or adjusted by
pressing and holding the
“SET ” button for three sec-
onds.
1. Setting the
Display Language
Your Turbo® can display
information on the dot-
matrix display area in six
different languages:
English (ENGL), German
(GER), French (FR), Italian
(ITA), Dutch (NED), and
Spanish (ESP). To select
your language push the
mode button repeatedly
until CLOCK is displayed
in the Dot-matrix Display
Area. Then, depress hold
the “MODE” button for
three seconds. The selected
language will be dis-
played. Use the “MODE”
button to scroll through the
languages. When the
selected language is dis-
played (default language is
English), press the “SET”
button once to confirm
your selection and exit dis-
play language mode.
2. Miles or Kilometers
selection (English only):
Your Turbo® Comp will
record distance and speed
in either miles (m & m/h)
or kilometers (K & Km/h).
Please note that miles can
only be selected when the
language setting is English.
All other languages display
only kilometers. (See
“Setting the Display
Language” above). To enter
your selection of miles or
kilometers, push the
“MODE” button until ODO
appears in the Dot-matrix
6
CLOCK
I
ODO
I
TRIP
I
AVSPD
I
MXSPD
I
ATM –
I
TIMER
I
INT
I
Dist
FIGURE 7