Filter
Top Products
22
P/N 211014 03/05
Insert spacer (H-22) through springs (P-12)
then assemble lower elevator tubes (P-19),
and springs (P-12), to brackets (P-21) using
bolts (H-18), plastic spacers (H-20), metal
spacer (H-22) and nuts (H-15) as shown.
5.
P-21
H-20
H-15
H-20
H-22
P-12
H-22
P-12
6.
P-19
H-31
P-30
H-29
H-11
IMPORTANT!
Position springs
(P-12) against
elevator tubes
as shown
Insert T-bolt (H-31) into Slam Jam
bracket (P-30) then, attach that
assembly to board using bolts (H-29)
and nuts (H-11).
H-18
TIGHTEN BOLT (H-18) IN
LOCK NUT (H-15) UNTIL
FLUSH (EVEN) WITH LOCK
NUT’S OUTER EDGE.
WARNING!
The spacer (H-22) will
sit above the board
brackets (P-21).
NOTE: