57
Table of Contents Menu Lists Index
GB
Notes
Set [White Balance] to [Auto] or adjust the
color in [One Push] under white or cool white
fluorescent lamps.
When you select [One Push], keep framing
white objects.
If you set [White Balance], [Scene Selection] is
set to [Auto].
Tips
If you have changed the battery pack while
[Auto] was selected, or taken this product
outdoors after inside use (or vice versa), aim
this product at a nearby white object for about
10 seconds for better color balance adjustment.
When the white balance has been set with [One
Push], if the lighting conditions changed by
bringing this product outdoors from inside the
house, or vice versa, you need to redo the [One
Push] procedure to readjust the white balance.
Exposure
You can fix the brightness of a picture
manually. Adjust the brightness when the
subject is too bright or too dark.
Auto
Adjusts the exposure automatically.
Manual
Adjusts the exposure manually.
When you set [Exposure] to [Manual],
select
/ and press Enter to adjust
the brightness.
Tips
You can also adjust manually by using the
MANU
AL dial (p. 32).
Focus
You can adjust the focus manually. You can
select this function also when you want to
focus on a certain subject intentionally.
Auto
Adjusts the focus automatically.
Manual
Adjusts the focus manually.
When you set [Focus] to [Manual], select
(nearby subject)/ (distant
subject) and press Enter to adjust the focus.
Notes
When you set [Focus] to [Manual], appears.
Tips
appears when the focus cannot be adjusted
any closer, and
appears when the focus
cannot be adjusted farther away.
It is easier to focus on the subject by moving
the power zoom lever towards T (telephoto) to
adjust the focus, then towards W (wide angle)
to adjust the zoom for recording. When you
want to record a subject at close range, move
the power zoom lever to W (wide angle), then
adjust the focus.
The focal distance information (distance at
which the subject is focused on; used as a guide
if it is dark and focus adjustment is difficult)
appears for a few seconds in the following cases.
When the focus mode is switched from
automatic to manual
When you set focus manually
You can also adjust manually by using the
MANU
AL dial (p. 32).