Filter
Top Products
32
Table of Contents Menu Lists Index
GB
Notes
It may take a while before this product starts
triangulating.
If this product cannot triangulate, the following
operations may resolve the issue.
Move to a place where radio signals are easier
to receive.
Tips
In the following situations, the current location
of this product shown on the map may be
different from the actual location. The margin
of error can be as wide as several hundred
meters.
When this product receives GPS signals that
have been reflected off surrounding buildings.
When the GPS signal is too weak.
To display recorded location information,
perform
(MENU) [Setup]
[
( Playback Settings)] [Data Code]
[Coordinates].
Establishing priorities for location
information
See page 69.
If you do not want to record location
information
Perform (MENU) [Setup]
[
( General Settings)] [GPS
Setting] [Off].
Controlling the image
settings manually with
the MANUAL dial
You can assign 1 menu item you use often
to the MANUAL dial.
The operation below is described as
adjusting the 3D depth using the MANUAL
dial that [3D Depth Adjustment] is
assigned to. The [3D Depth Adjustment]
here allows you to adjust the 3-dimensional
appearance of the image on the screen
during recording.
Press MANUAL to make this
product adjust the depth of the
3D image.
Pressing MANUAL repeatedly toggles
between enabling and disabling the
3D depth adjustment.
Rotate the MANUAL dial to adjust
the 3D depth while checking the
image on the screen.
MANUAL button
MANUAL dial