Sonocaddie V500 Fitness Electronics User Manual


 
44
Frequently Asked Questions (FAQs)
You can also find answers to FAQs at the
Sonocaddie website: www.sonocaddie.com/
.
Q1. What do I do when my Sonocaddie is not
detecting a signal?
Answer: The GPS unit must be used in open-sky
areas and away from buildings (such as club house),
deep forest, or cliff sides. Otherwise it won't receive
GPS signals and will show nothing on the display.
After power-up, a number/bar will appear on the
upper-left corner of the screen, which is the number
of satellites received. If showing "X", it means no
signal.
In addition, it takes several minutes to receive stable
signal after power-up even under an open-sky. If
there is still no signal, please check your battery life
displayed on the screen. As a last resort, try
restarting your Sonocaddie.
If you are on the course, all distance numbers will
automatically show on the screen. However the limit
of displayed yardage is 999 yards. Therefore any
distance beyond 999 yard will show 999 only. If the
unit shows " " when the satellite is available, it
means that the distance within 0~5 yards.