Filter
Top Products
14
“OPERATION INSTRUCTIONS”
HOW TO ADJUST THE ADJUSTING ENDCAPS OF THE REAR STABILIZER
a. After placing the equipment in the intended location for use, check the
stability of the equipment.
b. To level the equipment, turn one or both of the Adjusting Rear
Stabilizer EndCaps (37) in clockwise or counter-clockwise direction until
the equipment sets on the floor without rocking.
HOW TO ADJUST MAIN FRAME’S LEVELER
a. After placing the equipment in the intended location for use, make sure
the unit is completely level prior to adjusting the center level support.
b. The purpose of the Leveler (38) is to support the middle Main Frame,
adjust Leveler (38) under the Main Frame (1) until it rests firmly on the
floor.
c. To make the Leveler (38) rests firmly on the floor, turn the Leveler (38)
counter-clockwise until the Leveler (38) touches the floor without
rocking.
HOW TO MOVE THE ITEM SAFELY
Hold the Rear Stabilizer (8) up with two hands and tow the item to the desired place carefully.
Make sure the floor is level while moving the item.