Filter
Top Products
32 8.25E TREADMILL
www.smoothfitness.co.uk
COMPUTER OPERATION
3 SECONDS ALERT:
To ensure you are well prepared before the belt starts moving, every time you press the START button to start the belt, the SPEED
window will countdown 3 seconds with the LED showing “3-2-1” then the belt will start moving.
PAUSE/STOP:
When the treadmill is running, press the STOP button to pause the treadmill. All figures on the displayed on the LED will freeze.
Press START to resume the program and all displays will continue the performance until the program finishes. If you continue
pressing the STOP twice, then all data will return to 0 and the treadmill will return to POWER ON status. If there is no action within
30 seconds, the treadmill will return to POWER ON status.
ENGLISH/METRIC CONVERSION:
The treadmill computer display can show ENGLISH and METRIC information. The factory should have the proper setting on this for
different markets. In case that the treadmill needs to be converted between METRIC and ENGLISH readout, please follow the
procedure as below:
1. Set the POWER SWITCH to ON. Press the START button on the computer and hold it. Insert the SAFETY KEY then
release the START button. The computer will sound one short beep and METRIC LED lights up.
2. Press the START button to switch between METRIC/ENGLISH and press the STOP button to confirm the selection and
return to the POWER ON status.
QUICK START:
When the treadmill is in POWER ON status, press the START button to activate the QUICK START program. The speed will start
from 0.5MPH/0.8KMPH. Press the SPEED UP/DOWN button to change the speed. Press the INCLINE switch to elevate the
treadmill. The TIME, CALORIES and DISTANCE will count up from 0.
PROGRAM:
To select other programs, you will need to select the USER first. Press the INCLINE UP/DOWN button to select the USER CODE
from U1 to U9 then press the ENTER button to confirm the user code. If the user information has been previously input, press the
ENTER button again and hold it for 5 seconds then the computer will skip the user information set up procedure and enter the
program select procedure. To input the new user information, please follow the procedure as below:
WEIGHT set up – After the User Code confirmation procedure, The CALORIES/CAL PER HOUR display will show the default or
previous setting and begin blinking. Press the INCLINE UP/DOWN button to adjust the user weight information then press ENTER to
confirm.
HEIGHT set up – After the WEIGHT set up procedure, the TIME/DISTANCE display will show the default or previous setting and
begin blinking. Press the INCLINE UP/DOWN button to adjust the user height information then press ENTER to confirm.
AGE set up – After the HEIGHT set up procedure, the INCLINE/LEVEL display will show the default or previous setting and begin
blinking. Press the INCLINE UP/DOWN button to adjust the user age information then press ENTER to confirm.
NOTE: THE USER INFORMATION IS PERMANENTLY STORE ONLY ONCE THE USER HAS COMPLETED A PROGRAM.