FX20HR MOTORIZED TREADMILL
Visit us at: www.evofitness.com
24
COMPUTER OPERATION
Extend the workout time from the previously saved program:
If you want to extend the total workout time from the previously saved program press the START button anytime during the
workout. The LED of the CUSTOM SAVE button will light up and blink for 10 seconds then stay lit up. After completing the
previously saved program the treadmill will start a one-minute cool down session. Press the START button again during
the cool down session and the treadmill will skip the cool down procedure and continue running at a speed of 2.0 mph / 3.2
km/h and incline of level 0. Press the SPEED UP/DOWN and INCLINE UP/DOWN buttons for every minute section then
follow the SET AND SAVE procedure after completing the workout.
If you already press the START button once during the workout and intend to extend the workout time but decide not to
extend the workout time, press the START button again to switch off the LED light of CUSTOM SAVE button. Or wait till the
previous saved program complete and complete the cool down procedure then follow the SET AND SAVE procedure.
USING THE CHEST BELT HEART RATE MONITOR (optional feature dependant on model purchased):
For proper operation, the chest belt should be worn across the front of your body just below the chest line as shown in the
drawing. To ensure a proper operation the chest belt needs to be moisturized, please make the 2 rubber pads under the
chest belt wet prior to exercising.
Strap chest belt across the front below the chest line.