Filter
Top Products
25
English
24
English
NECESSARY PROCEDURES AFTER CHANGING THE BATTERY
* After the battery is replaced with a new one , or in case an abnormal display (broken
numerals or letters etc.) appear, follow the procedures below to reset the IC.
➪
Set the digital time/calendar and analogue
time.
(See “TIME/CALENDAR SETTING” on page 8)
B
A
C
D
➡
➡
➡
Press and hold the four buttons for 2 to 3
seconds at the same time.
➪
* All digital indicators are reset to show
" 1" , " SUN" and "12:00 00" in the TIME/
CALENDAR mode.
All digital indicators disappear at
once and the display shown at left
appears when the buttons are re-
leased.
➡
BATTERY CHANGE
The miniature battery which powers your watch should last approxi-
mately 3 years. However, because the battery is inserted at the
factory to check the function and performance of the watch, its actual
life once in your possession may be less than the specified period.
When the battery expires, be sure to replace it as soon as possible
to prevent any malfunction. For battery replacement, we recom-
mend that you contact an AUTHORIZED SEIKO DEALER and request
SEIKO SR1130W battery.
* The battery life may be less than 3 years if:
• the alarm is used for longer than 20 seconds a day,
• the stopwatch is used for longer than 3 minutes a day,
• the confirmation sound is used more than 10 times a day, and/or
• the timer is used more than once a day.
BATTERY LIFE INDICATOR
● When the second digits start flashing in the TIME/CALENDAR mode, replace the
battery with a new one as soon as possible. Otherwise, the watch will stop
operating in a couple of days. We suggest that you have the battery replaced by an
AUTHORIZED SEIKO DEALER.
* Even after the battery life indicator appears, time accuracy is not affected.