Filter
Top Products
23
English
22
English
*6 Remarks on stopwatch function:
• The lap number counts up to “199”. After “199”, the number is displayed in two digits
such as “00” for 200, “00” for 300, and so on.
• The split number counts up to “199”. After “199”, the number is displayed in two
digits such as “00” for 200, “00” for 300, and so on.
*7 Remarks on memory recall function:
• In memory recall after measurement, the oldest measurement in memory is displayed. In
memory recall during measurement, the newest measurement in memory is displayed.
*8 Remarks on timer function:
• The digits advance quickly if Button D is kept pressed.
• Pressing button A while the digits are flashing can reset the timer to “0:00,” and the
minute digits start flashing.
• If the watch is left untouched in the TIMER SETTING display with an item flashing,
it will automatically return to the TIMER mode in 2 to 3 minutes.
*9 Remarks on alarm function:
• The digits advance quickly if Button D is kept pressed.
• When the time in the TIME/CALENDAR mode is set in the 24-hour display, the alarm
time will also be shown in the 24-hour display.
• When setting the hours in the 12-hour display, check that AM/PM is properly set. “P”
mark appears when the alarm time is set to PM.
• If the watch is left untouched in the ALARM SETTING display with an item flashing,
it will automatically return to the ALARM mode in 2 to 3 minutes.
NOTES ON OPERATING THE WATCH
*1-*5 Remarks on time/calendar function:
*1 • The day of the week is automatically set once the year, month and date are set.
• When the time is set in the 24-hour display, the alarm time will also be shown in the
24-hour display.
*2 • The digits,other than seconds and “12H”/“24H”, advance quickly if Button D is kept
pressed.
• When the seconds read any number between “30” and “59” and Button D is
pressed, one minute is added.
• When setting the hours in the 12-hour display, check that AM/PM is properly set. A
PM indicator (“P” mark) from the afternoon is shown when the 12-hour display is
selected. In the 24-hour display, there is no such indicator.
*3 • The hands move clockwise by pressing Button D. They move quickly if the button is
kept pressed.
• The hands keep advancing if Button D is released. Press Button D again to stop
them.
• After the digital and analogue times are set, if you want to correct digital time to adjust
second digits only, it is not necessary to adjust analogue time again
*4 If the watch is left untouched in the TIME/CALENDAR SETTING display with an item
flashing, it will automatically return to the TIME/CALENDAR mode in 2 to 3 minutes.
*5 The hourly time signal will not ring while alarm is sounding.