Filter
Top Products
85
After the battery is replaced with a new one, or the watch hands move improperly, follow the
procedure below. The built-in IC will be reset and the watch will resume normal operation.
How to reset the IC
1. Pull out crown “1” to the second click.
2. Press buttons B and C at the same time.
Before using the watch, adjust the time, barometer hands and alarm hands by referring to the
corresponding sections of this instruction manual. (Refer to “TIME SETTING”.)
Note on the battery change:
It takes 3 hours after the battery is changed or the IC is reset before the watch shows the proper
change in the atmospheric pressure by the atmospheric pressure change indicator.
NECESSARY PROCEDURE AFTER THE BATTERY CHANGE
(RESETTING THE IC)
All the stored data will be erased from the memory by following the procedure. For details, refer to
“Notes on battery change”.
When button C is pressed to adjust the position of the barometer hand “2”, the atmospheric pressure
change indicator automatically moves.
86