Filter
Top Products
Notes:
If the alarm hands are advanced 12 hours from the current time by keeping button A
pressed, the hands will not move if the button is pressed further. In that case, the single-
time alarm will not be engaged. Release button A and set the alarm time again.
The single-time alarm cannot be set to ring at the time more than 12 hours after the current
time.
To reset and cancel the designated alarm time
To set the single-time alarm newly, press button A to set it to the desired time. The alarm
time previously set will be replaced by the new one. (The hands only advances by pressing
button A. To reset them to the time before the previous alarm time, cancel it following the
procedure below and then set the desired alarm time.)
To cancel the alarm time previously set, keep button A pressed to advance the alarm
hands to the current time, or pull out crown “2” to the first click and then push it in to the
normal position.
[How to use the regular alarm]
Pull out crown "2" to the first click and press button A to set the desired alarm time.
A
Normal position:
Regular alarm
is disengaged.
First click position:
Regular alarm is
engaged.
(1) Pull out crown “2” to the first click. The alarm
hands indicate the alarm time previously set.
If you wish to ring the alarm at the same
time, the alarm setting procedure is
completed. At the designated time, the alarm
will ring for 20 seconds and stop.
To stop the alarm while it is ringing, press
button A, B or C.
(2) To set the alarm time newly, pull out
crown “2” to the first click and press
button A to set the alarm hands to the
desired time. They advance in one
minute increments and move quickly if
button A is kept pressed. The alarm
time setting procedure is completed.
67 68
Time difference adjustment of the alarm hour hand
The alarm hands can be adjusted independently of the other hands to show the time of the
place you visit while you travel abroad.
(1) Pull out crown "2" to the second click.
(2) With each press of button "A", the alarm
hour hand advances one hour. It advances
quickly if the button is kept pressed.
A
Pull out crown “2”
to the second click.
While the regular alarm is not in use, it is recommended that crown “2” is pushed in to normal
position to avoid any possible mistaken operation.
The alarm time you have set can be used repeatedly unless it is newly set.
The warning sound beeps and the alarm hands
stop, indicating the time when crown "2" pulled
out to the second click.
Make sure that crown "1" is at the normal
position.
The alarm hour hand moves only clockwise.
The alarm hands will not move back and indicate the time on a 12-hour basis. Therefore, follow the
methodsbelowtocalculate thenumberofhourstoadvancethealarmhourhand.
Ifthe timedifferencebetweenthetwocitiesismorethan12hours,subtract12hoursfromit.
If the time difference between the two cities is less than 0 hours, add 12 hours to it.