Filter
Top Products
www.seuservice.com
89
TEST MODE WRITING
POSITION
ADJUST
SELECT
RESET
RBG
PIC-ADJ
SET
P
CONTRAST
BRIGHTNESS
H.POSI
V.POSI
H.SIZE
V.SIZE
EXIT
CONTRAST
BRIGHTNESS
H.POSI
V.POSI
H.SIZE
V.SIZE
EXIT
H.POSI 128
. . . . . . . . . . . . . . . . . . . .
H.POSI 156
. . . . . . . . . . . . . . . . . . . .
WRITING
WRITING
ADJUST
SET
PIC-ADJ
PIC-ADJ
Press either or PIC - ADJ button.
The on-screen menu will have
one item in purple and 6 items in
white.
Choose H. POSI or V. POSI by using either or
PIC ADJ button.
When the selection of the H.
POSI or V. POSI is decided, the
adjustment data scale bar appears
on the screen.
Press the SET button (to decide selection).
Press the WRITING button (for storing and finish).
Make adjustment by using either
or ADJUST
button.
When discontinuing the adjustment, choose EXIT from the menu at the stage of procedure and press
the SET button.
To continue adjusting other menu items, repeat procedure ~ .
Unless the adjustment data is stored, the data in the adjusted status will be erased at the time the power
is turned off and the pre-adjustment status will remain when the power is turned on next time.
Have the H. POSI or V. POSI
displayed in purple. The Figure
shows the status in which H.
POSI is selected.
When making adjustments
in vertical directions, also
use either
or
ADJUST button.
The WRITING display appears
and the adjustment data is stored.
As the Cursor is moved, the
adjustment data value changes.
Make adjustment so as to obtain
the desired on-screen position
status.
ADJUSTING THE ON-SCREEN DISPLAY POSITION
Although the on-screen display position (H. POSI, V. POSI) has been adjusted at the time of
shipment from the factory, readjustment can be made if desired. When the Game Board is
replaced, readjustments may be necessary.
1
2
3
4
5
2
2
4