Filter
Top Products
OPERATION AND ADJUSTMENT
THE MAINTENANCE-FREE WALKING BELT
Your treadmill features a maintenance-free walking
belt coated with PERFORMANT LUBETM, a high-
performance lubricant. During the first few hours of
use, it Is normal for a small amount ofwhite powder to
appear on the foot roilsand the walking platform. The
white powder is high-performance lubricantfrom the
walking bell IMPORTANT: Never apply silicone
spray or other substances to the walking belt or
the walking platform. They will deteriorate the
walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
A temporary adapter that looks like the adapter illus-
trated in Drawing 2 may be used to connect this plug to
a 2-pole receptacle as shown in Drawing 2 ifa
properly grounded outlet is not available.
2
Grounded
Box
Grounding Pin
Grounding
Plug
Lug
Metal Screw
This product must be grounded. If itshould malfunc-
tion or break down, grounding provides a path ?f least
resistance for electric current to reduce the risk of elec-
tric shock. This product is equipped witha cord having
an equipment-grounding conductorand a grounding
plug. Plug the power cord into an appropriate outlet
that is properly installed and grounded in accor-
dance with all local codes and ordinances.
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that lookslike the plug illus-
trated in Drawing 1.
1 Grounded
Grounding Plug
Grounding Pin
Grounded Outlet
The temporary adapter should be used only untila prop-
eriy grounded outlet (Drawing 1) can be installedby a
qualified electrician.The green colored rigid ear, lug, or
the like extendingfrom the adapter must be connected
to a permanent ground such as a properlygrounded
outlet box cover. Whenever the adapter is used it must
be heldin place by a metal screw. Some 2-pole recep-
tacle outlet box covers are not grounded. Contact a
qualified electriclan to determine if the outlet box
cover is grounded before using an adapter.
HOW TO INSTALL BA'I-rERIES IN THE CONSOLE
The console requires two "AA" batteries (not includ-
ed) for the motivational fitness monitorto operate;
alkaline batteries are recommended.
To install batteries, first slide the battery cover open
(see the drawing below). Remove the battery clip from
the console. Find the markings inside the battery clip
showing which direction the batteries should be turned.
Press the batteries intothe battery clip. Replace the
battery clip in the console and close the battery cover.
Battery Cover
ery Clip