Filter
Top Products
ASSEMBLY'' "
The CROSS WALK is shipped in the compact stowaway position.Set the CROSS WALK in a cleared area and
remove all packing materials. Make sure that all parts have been removed before you dispose of the pack-
Ing materials. Follow the instructionsbelowto convertthe CROSS WALK to the operating position. No tools are
required.
1. Raise the Upright (10) to the vertical position. Slide the Lock Knob
Washer (78) onto the Lock Knob (77) and tighten the Lock Knob
intothe Upright.
1
78
77
2. Remove the paper backing from the Wrench Clip (65). Press the
Wrench Clip onto the Right Roller Bracket (62) in the indicated
location. Press the Allen Wrench (66) intothe Wrench CSp.
Make sure that all parts are tightened securelybefore you use the
treadmill. The use of the remaining parts willbe described in other
sections ol this.manual. Note: To protect the floor, a covering
should be Placed under the treadmill.
5