Filter
Top Products
Maintenance
The safety and performance of this product can be maintained only when examined regularly for damage and wear.
Disconnect power supply before servicing or performing maintenance on the Elliptical Trainer. Examine the
Elliptical Trainer regularly for damage and wear. Replace broken components immediately or put the
equipment out of use until repaired.
Daily/Before Each Use: Examine machine. Make sure it looks in good condition and operates smoothly. If you find
damage, DO NOT USE. Contact your authorized Schwinn
®
Fitness Dealer for servicing.
Daily/After Each Use: Clean machine with a clean, dry cloth. Use a damp cloth to clean your Elliptical Trainer and
Console. Use a mild detergent or spray cleaner on upholstery. Do not use cleansers containing enzymes.
Weekly: Examine the machine for smooth rear roller operation. Clean all surfaces.
Monthly: Examine all bolts and screws. Tighten as necessary.
IMPORTANT: Do not use a petroleum-based solvent when cleaning. It causes damage to the finish on the Elliptical
Trainer and Console. Avoid getting unwanted moisture on the Console.
If you have any questions on the correct use or maintenance of this equipment, call your authorized distributor or Nautilus
Customer Service at 1-800-NAUTILUS (628-8458). Only Nautilus-trained or Nautilus-authorized personnel should make
extensions, readjustments, modifications, or repairs.
Leveling the Elliptical Trainer
You can level the machine to adjust for uneven surfaces. To make the machine level, turn the two leveling bolts located on
the bottom of the rear stabilizer to lift or lower the machine until it is level with the surface.
Moving the Elliptical Trainer
Carefully, but firmly lift the rear end of the Elliptical
Trainer. Slowly steer the Elliptical Trainer to the new
location. Be careful while moving the unit. A sharp,
direct or indirect, hit to the machine can affect
computer operation.
Owner’s Manual
19