Salton WALKMILL Treadmill User Manual


 
17
CLEANING
Care has been taken to assure that the Walkmill has been
properly adjusted and lubricated during production. It is not
recommended that the user attempt service on the internal
components. However,from regular use the outer surface may
appear dull or dirty, following the instructions listed below will
restore and preserve the original finish.
NOTE: Always unplug the Walkmill™ prior to cleaning.
Cleaning metal surfaces may be accomplished by using a soft
cotton or terry cloth rag with light application of car wax. Do not
use aerosol sprays or pump bottles as they may deposit wax on the
walking surface.
STORAGE
1. Keep the Walkmill unplugged when not in use.
2. Keep all the power sources turned OFF.
3. Store Magnetic Safety Clip out of reach of children.
4. Store with the Handgrips towards the wall and Wheels locked.
Please do not perform or attempt any customizing, adjustments,
repair or maintenance that is not described in this manual. If you
experience any difficulty, please contact our website at:
www.walkmill.com.
2
ADDITIONAL IMPORTANT
SAFEGUARDS
1. Set up the Walkmill on a flat, level surface and clear the area
around it, so you can get on and off freely and safely.
2. Always lock all 4 Wheels into place prior to operation.
3. Keeps pets a safe distance from the Walkmill.
4. Make sure that the Walkmill has come to a complete STOP and
has been turned OFF before getting on or off.
5. This product is to be used by only one person at a time.
6. Parental supervision is advised if the device is used by children.
The Walkmill is not recommended for children under 10 years
of age.
7. Always wear athletic shoes and proper clothing when on the
Walkmill.
8. Use care and firmly hold the Hand Grips while exercising.
The Walkmill is not intended for running.
9. Consult your physician before beginning this or any
exercise program.
10. Do not put more than 300 lbs. of pressure on the Walkmill.
11. Read this entire manual before using the Walkmill.
12. NOTE: This product must be grounded. No plug adapter
should be used. Improper connection of the
equipment - grounding conductor can result
in a risk of electrical shock.
GROUNDED 3-CONDUCTOR PLUG
This appliance is equipped with a grounded-type 3-wire cord (3-prong
plug).This plug will only fit into an electrical outlet made for a 3-prong
plug. This is a safety feature. If the plug should fail to fit the outlet,
contact an electrician to replace the obsolete outlet. Do not attempt to
defeat this safety feature.