Filter
Top Products
15
should set the uorescent lamp frequency to that in your region.
Selecting 60Hz
Press the CAMERA MODE selection button to check the current frequency
selection. If the LCD display shows 60 it means the present frequency is set
for 50Hz. Press the Shutter button to change the frequency to 60 Hz.
Selecting 50Hz
If the LCD shows 50 it means the present is set for 60Hz. Press the Shutter
button to change the frequency to 50Hz.
Installing the Software
Important: Before attempting to install the software, make sure that you do
not have the camera or the USB cable attached to your computer. This may
cause your installation to fail. Do not connect the cable to the computer until
the entire installation process has been completed. Please follow the step by
step instructions that appear on the screen.
1. Insert the CD into your CD-Rom drive. Make sure your camera is
not connected to the computer.
2. On the "Install your camera software" screen, select your camera
model from the drop down list and click the "Install" button to install
Spy Shot Photo Manager followed by the installation of PhoTags
WebCam Express.