Filter
Top Products
8
9. While another person holds the Console (6)
near the Upright (3), connect the console wire
harness to the Upper Wire Harness (32).
Tip: Start all screws before tightening any of
them. Also, avoid pinching the Wire Harness
during this step. Insert the excess Wire
Harness (32) downward into the Upright (3).
Attach the Console (6) to the Upright with four
M4 x 15mm Screws (40).
3
40
32
6
Console Wire
Harness
9
8. The Console (6) can be operated with four 1.5V
“D” batteries (not included); alkaline batteries
are recommended. IMPORTANT: If the exer-
cise cycle has been exposed to cold temper-
atures, allow it to warm to room temperature
before inserting batteries into the Console. If
you do not do this, the console displays or
other electronic components may become
damaged. Press the tab on the battery cover
and remove the battery cover. Insert four batter-
ies into the console; make sure that the bat-
teries are oriented as shown. Then, reattach
the battery cover.
The Console (6) can also be operated with an
optional power supply (not included). To pur-
chase a power supply, call the telephone
number on the front cover of this manual. To
avoid damaging the console, use only a
manufacturer-supplied power supply. Plug
one end of the power supply into the jack on the
console; plug the other end into an outlet
installed in accordance with all local codes and
ordinances.
6
Batteries
Battery
Cover
8