Filter
Top Products
6
2. While another person lifts the rear of the Frame
(1), attach the Rear Stabilizer (14) to the Frame
with two M10 x 73mm Button Bolts (33) and two
M10 Black Split Washers (34).
33
34
34
14
1
3
3
35
Be careful to avoid
pinching the Wire
Harnesses (31, 32)
55
55
1
35
3. While another person holds the Upright (3) near
the Frame (1), connect the Upper Wire Harness
(32) to the Lower Wire Harness (31).
Tip: Avoid pinching the wire harnesses dur-
ing this step. Gently pull the upper end of the
Upper Wire Harness (32) to remove the slack,
and slide the Upright (3) onto the Frame (1).
Attach the Upright with three M10 x 20mm
Button Screws (35) and three M10 Bright Split
Washers (55).
2
32
31
4
4. Attach the Water Bottle Holder (29) to the
Upright (3) with two M4 x 15mm Screws (15).
15
29
3