Filter
Top Products
6
4. While another person holds the Handlebar (7) near
the Handlebar Post (6), feed the Upper Wire
H
arness (16) and the Pulse Sensor Wire (45) up
through the indicated hole in the Handlebar. Attach
t
he Handlebar to the Handlebar Post with three
M8 x 25mm Button Screws (19) and three M8 Split
Washers (28).
6. Insert the Bookrack (8) into the slots in the Console
(9). Attach the Bookrack with two M4 x 25mm
Screws (20). Be careful not to pinch the wires in
the Console.
8
20
9
4
6
7. While another person holds the Console (9) near
the Handlebar (7), connect the Pulse Sensor Wire
(45) and the Upper W
ire Harness (16) to the corre
-
sponding wires on the Console.
Insert all excess wiring downward into the
Handlebar Post (6).
Attach the Console (9) to the
Handlebar (7) with four M4 x 16mm Screws (21).
Be careful not to pinch the Pulse Sensor W
ires
(45) or the Upper Wire Harness (16).
7
6
Console
Wires
9
21
21
7
6
28
19
19
28
16
7
Hole
4
5
16
45
5. The Console (9) requires four “D” batteries (not
included); alkaline batteries are recommended.
Press the tab on the battery cover and remove the
battery cover. Press four batteries into the battery
clips;
make sure that the batteries are oriented
as shown by the diagram inside the battery
clips.
Then, reattach the battery cover.
9
Battery
Cover
Batteries
5