Filter
Top Products
17
Follow your progress with the display.
See step 5 on page 14.
Measure your heart rate if desired.
S
ee step 6 on page 15.
Turn on the fan if desired.
See step 7 on page 15.
When you are finished exercising, remove the
key from the console.
When the program has ended, make sure that
the incline of the treadmill is at the lowest set-
ting. Next, remove the key from the console and
put it in a safe place. Note: If the display remains
lit after the key is removed, the console is in
the “demo” mode. See page 19 and turn off the
demo mode.
When you are finished using the treadmill,
switch the reset/off circuit breaker to the off
position and unplug the power cord.
H
OW TO USE A HEART RATE PROGRAM
Heart rate program 1 will automatically adjust the speed
and incline of the treadmill to keep your heart rate within
a preset range that you select. Heart rate program 2 will
keep your heart rate near a target heart rate.
Follow the steps below to use a heart rate program.
Put on the optional chest pulse sensor.
You must wear the optional chest pulse sensor
(see page 15) to use a heart rate program.
Insert the key into the console.
See HOW TO TURN ON THE POWER on
page 14.
Select a heart rate program.
To select a heart rate program, press the P1 but-
ton or the P2 button. The display will show which
program (“P1” or “P2”) is selected.
If heart rate
program 1
is selected,
a profile of
the target
heart rate
settings of
the program
will appear in
the matrix.
If heart rate
program 2
is selected,
a heart sym-
bol will ap-
pear in the
matrix.
3
2
1
7
6
5
4
CAUTION: If you have heart prob-
lems, or if you are over 60 years of age and
have been inactive, do not use the heart rate
programs. If you are taking medication regu-
larly, consult your physician to find whether the
medication will affect your exercise heart rate.