Filter
Top Products
22
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also al-
lows you to select miles or kilometers as the unit of
measurement. In addition, the information mode allows
you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button, insert the key into the console, and continue to
hold the Stop button for a few seconds. When the infor-
mation mode is selected, the following information will
be shown:
The Time display will show
the total number of hours that
the treadmill has been used.
The Distance/Pace display
will show the total number of
miles (or kilometers) that the
walking belt has moved.
An “E” for english miles or an
“M” for metric kilometers will
appear in the Speed display.
Press the Faster button to
change the unit of measure
-
ment.
Note: The Calories/Pulse
display should be blank.
If a
“d” appears in the display, the
console is in the “demo” mode.
This mode is intended to be
used only when a treadmill is
displayed in a store. When the console is in the demo
mode, the power cord can be plugged in, the key can
be removed from the console, and the displays and in-
dicators on the console will automatically light in a pre-
set sequence, although the buttons on the console will
not operate. If a “d” appears in the display when the
information mode is selected, press the Slower but-
ton so the display is blank.
To exit the information mode, remove the key from the
console.