Filter
Top Products
34
HOW TO USE THE REMOTE CONTROL
The first time you use the remote
control, insert batteries (see HOW
TO REPLACE THE BATTERIES IN
THE REMOTE CONTROL at the
right).
Next, stand on the treadmill and
hold the remote control near the
television. Point the remote control
directly at the television.
Press the Power button ( ). After
a few moments, the television will
turn on or turn off.
Press the volume (Vol) increase or
decrease button to adjust the TV
volume.
Press the Mute button to turn on or turn off the sound.
Press the numbered channel buttons and the dash
button (–) or the Channel (CH) increase or decrease
button to select a channel.
Press the return button ( ) to view the previous
channel.
Press the Menu button to view the main menu or to
view a previous menu. See pages 35 and 36 for infor-
mation about the menu.
Press the arrow keys to navigate in the menu. Press
the OK/Enter button to make a selection in the menu.
Press the Exit button to exit any menu.
Press the List button to view a list of channels. If you
have labeled any channels, the menu will also show
the channel label. See page 35 for information about
labeling channels.
Press the EPG button to view the electronic program
guide. Note: The electronic program guide is only avail-
able when viewing ATSC digital television.
Press the Display button to view information about the
current program and the broadcast or cable signal.
Press the CC button repeatedly to turn on or turn off
closed captioning. See step 6 on page 36 to adjust
closed captioning settings.
Press the Source button repeatedly to select the input
source. Select TV for cable or antenna input, AV for a
device connected to the TV with an AV cable, or HDMI
for a device connected with an HDMI cable.
Press the MTS button repeatedly to select English or
Spanish as the audio setting language.
Press the Aspect button repeatedly to select normal,
wide, cinema, or zoom image as the display format.
Press the V-Chip button to adjust parental control
settings.
Press the Fav button to select the Favorite List of
channels. See step 4 on page 35 to create a favorite
channels list.
HOW TO REPLACE THE BATTERIES IN THE
REMOTE CONTROL
To replace the batteries,
first locate the battery
cover on the back of the
remote control. Push
down on the clip on the
battery cover and pull off
the battery cover.
Next, remove the old batteries from the remote control,
and insert two new AAA batteries. Make sure to insert
the batteries as shown in the drawing. Then, press
the battery cover onto the remote control.