Filter
Top Products
15
19. Press the Grommet (77) into the square hole in
the Base (94).
20. Remove the #8 x 1/2" Machine Screw (114) and
the Wire Cover (117) from the TV Bracket (118).
With the helpf of a second person, hold the TV
(119) near the TV Bracket (118) and insert the
wires from the TV down through the indicated
Cable Tie (99).
Attach the TV (119) to the TV Bracket (118) with
four M4 x 12mm Screws (115). Start all four
Screws before tightening them.
Carefully pull the wires tight, and then tighten the
Cable Tie (99) around the wires.
Re-attach the Wire Cover (117) with the #8 x
1/2" Machine Screw (114).
94
77
19
20
18. Attach the Rear Feet (57) to the Frame (56) as
shown with four #8 x 3/4" Screws (2).
Lower the Frame (56) (see HOW TO LOWER
THE TREADMILL FOR USE on page 37).
18
57
2
2
57
56
115
Wires
114
117
119
99
118
115