Filter
Top Products
20
HOW TO CONNECT A VCR, DVD PLAYER, OR
OTHER DEVICE USING AN AV CABLE
1. Connect the three-pronged end of an RCA AV
Cable to your VCR, DVD player, or other device.
2. Plug in the power cord of your device. See your
VCR, DVD player, or other device’s user’s manual
for proper grounding instructions.
3. Connect the RCA AV Cable to the audio/video input
jack on the 15" digital TV as shown below.
4. To use the tie blocks, see step 4 at the right.
Note: Only use the tie blocks after you have
connected all desired cables.
HOW TO CONNECT A DVD OR BLU-RAY PLAYER
OR OTHER DEVICE USING AN HDMI CABLE
1. Connect one end of an HDMI Cable to your DVD or
Blu-ray player or other device.
2. Plug in the power cord of your device. See your
DVD or Blu-ray player or other device’s user’s
manual for proper grounding instructions.
3. Connect the other end of the HDMI Cable to the
HDMI input jack on the 15" digital TV as shown at
the left.
4. If desired, apply the included tie blocks as shown
at the left. First, remove the paper covering the
adhesive on the back of a tie block. Then, apply the
adhesive on the tie block in the location desired.
Wrap one of the included zip ties through the tie
block and around the wires. Then, pull the zip tie
on the tie block to secure the wires. Cut the end of
the zip tie. Repeat this step with as many tie blocks
as desired.
IMPORTANT: Do not plug any devices into the USB
port on the side of the 15" digital TV.
Tie
Blocks
AV Cable
Connectors
HDMI
Cable