Filter
Top Products
8
2. Hold the Right Upright (74) near the Right Base
Cover (77). See the inset drawing. Make sure
the wire tie is in the rectangular hole as
s
hown. Tie the wire tie in the lower end of the
Right Upright securely around the end of the
U
pright Wire Harness (75). Then, pull the other
end of the wire tie up through the top of the
Right Upright until the Upright Wire Harness is
routed completely through the Right Upright.
Gently pull up on the Upright Wire Harness (75)
as you set the Right Upright (74) on the Base
(83) inside the Right Base Cover (77). Be care-
ful not to pinch the Upright Wire Harness.
Attach the Right Upright (74) to the Base (83)
with two 3/8" x 3 3/4" Bolts (72) and two 3/8"
Star Washers (90). Note: It may be necessary to
tip the top of the Right Upright forward slightly
as you thread the Bolts into it. Do not tighten
the Bolts yet.
83
75
77
2
74
90
72
75
74
Wire
Tie
3. Hold the Left Upright (73) near the Left Base
Cover (76). See the inset drawing. Make sure
the wire tie is in the rectangular hole as
shown. Tie the wire tie securely around the end
of the TV Cable (49) and the AV Cable (97).
Then, pull the other end of the wire tie up
through the top of the Left Upright until the TV
Cable and the AV Cable are routed completely
through the Left Upright.
Gently pull up on the TV Cable (49) and the AV
Cable (97) as you set the Left Upright (73) on
the Base (83) inside the Left Base Cover (76).
Be careful not to pinch the Cables.
Attach the Left Upright (73) to the Base (83) with
two 3/8" x 3 3/4" Bolts (72) and two 3/8" Star
Washers (90). Note: It may be necessary to tip
the top of the Left Upright forward slightly as you
thread the Bolts into it. Do not tighten the
Bolts yet.
With the help of a second person, lower the
treadmill off the cardboard stand.
83
76
3
73
49
97
90
72
49, 97
73
Wire
Tie
Wire
Tie
Wire
Tie