Filter
Top Products
8
6. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (56) so the treadmill is more stable; do
not fully fold the Frame yet.
Remove and discard the two indicated bolts (A)
and the shipping bracket (B).
Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4),
and the shipping bracket (C) from the Base (83).
The Bolt and Nut will be used in the next as-
sembly step. Discard the shipping bracket.
6
83
B
A
56
4
8
C
7. Attach a Wheel (84) with the 3/8" x 2" Bolt (4)
and the 3/8" Nut (8) that you removed in step 6.
Do not overtighten the Nut; the Wheel must
turn freely.
7
84
8
4
5. Hold a Bolt Spacer (80) inside the lower end of
the Right Upright (78). Insert a 3/8" x 4 1/2" Bolt
(6) with a 3/8" Star Washer (9) into the Right
Upright and the Bolt Spacer. Repeat this step
w
ith a second Bolt Spacer (80), 3/8" x 4 1/2"
Bolt (6), and 3/8" Star Washer (9).
Hold the Right Upright Spacer (79) and the
R
ight Upright (78) against the Base (83). Be
careful not to pinch the Upright Wire (38).
Partially tighten the two 3/8" x 4 1/2" Bolts (6);
do not fully tighten the Bolts yet.
79
78
38
9
8
0
80
6
5
83