Filter
Top Products
11. Insertthe Backrest Bracket (16) through the slot
in the Bench Frame (1) and under the Adjustment
Lever (29). Make sure that the M1Ox 72mm
Flat Head Screw (46) is under the Backrest
Bracket arm.
Lubricate an M10 x 155mm Button Bolt (57) with
grease. Attach the Backrest Tubes (10) to the
Bench Frame (1) with the Bolt, two M16 Washers
(53), and an M1O Nylon Locknut (56). Do net
overtighten the Locknut; the backrest Tubes
must be able to pivot easily.
12. Attach the Backrest (12) to the Backrest Tubes
(10) with four M6 x 38mm Screws (50) and four
M6 Washers (55).
Tighten the four MlO Nylon Locknuts (56)
used in step 10.
13. Attach the Seat (11) to the Bench Frame (1) with
an M6 x 63mm Screw (47), an M6 Washer (55),
and two M6 x 16mm Screws (48).
11
13
56
29
16
50
11
10
Lubricate
5O
57
9