6
6. Apply grease to the long side of a Bolt Set (65). Have
a second person hold the lower end of the left Upper
Body Arm (29) inside of the bracket on the Left Pedal
Leg (4). Attach the left Upper Body Arm to the Left
Pedal Leg with the Bolt Set.
Identify the Left Pedal (10). Attach the Left Pedal to
the Left
Pedal Leg (4) with an M10 x 55mm Carriage
Bolt (83), an M10 Washer (20), and an Adjustment
Knob (72). Note: The slot in the Left Pedal Leg allows
the Left Pedal to be positioned as desired.
Repeat this step on the right side of the elliptical exer-
ciser.
Regularly tighten both Adjustment Knobs (72).
See step 3. Tighten the six M10 x 20mm Button
Screws (49).
4
10
72
20
83
65
6
65
29
7. The Console (17) requires four “D” batteries (not
included); alkaline batteries are recommended.
Remove the two battery covers from the Console.
Next, insert four batteries into the battery compart-
ment. Make sure that the batteries are oriented as
shown by the diagrams inside of the battery com
-
partments. Then, reattach the battery covers to the
Console.
Attach the Book Rack (99) to the Console (17) with
two M4 x 16mm Screws (94) as shown.
7
17
94
99
Batteries
Battery
Covers
Grease
5. Attach the Water Bottle Holder (70) to the Upright (2)
with two M4 x 16mm Screws (94).
5
2
70
94