Filter
Top Products
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose ofthe packing materials untilassembly is completed. Assembly requires the included allen wi_n._
and your own phillips screwdriver _ and wire cutters _.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shippingcarton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simplywipe off
the lubdcantwith a soft cloth and a mild, non-abrasive cleaner.
Extension Leg Screw/Handrail Screw (53)-4
<z 0®
Small Screw (13)-2
Console Screw (99)-6
1. With the help of a second person, carefully raise the
Uprights (11) untilthe treadmill IsIn the positionshown.
2. Insert one of the Extension Legs (34) into the treadmill
as shown. (Note: It may be helpful to tip the Uprights
[11] in the direction shown by the arrow as you insert
the Extension Leg.) Make sure that the Base Pad (40) is
on the indicated side of the Extension Leg. Attach the
Extension Leg with an Extension Leg Screw (53). Make
sure to push on the head of the Extension Leg
Screw while tightening it.
Attach the other Extension Leg (34) inthe same way.
53
5