Filter
Top Products
9
6. Press a Base Cap (87) into the Base (95).
87
9
5
6
7. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (56) so that the treadmill is more stable;
do not fully fold the Frame yet.
Remove the M10 Nut (19), the M10 x 50mm
Bolt (31), and the shipping bracket (A) from the
Base (95). Attach a Wheel (97) with the Bolt and
the Nut that you just removed. Do not over-
tighten the Nut; the Wheel must turn freely.
Discard the shipping bracket.
7
95
97
31
56
19
A
8. With the help of a second person, hold a Bolt
Spacer (90) inside the lower end of the Left
Upright (85). Insert an M10 x 95mm Bolt (8) with
an M10 Star Washer (9) into the Left Upright and
the Bolt Spacer. Repeat this step with a second
Bolt Spacer (90), M10 x 95mm Bolt (8), and
M10 Star Washer (9).
Orient the Left Upright (85) and the Left Upright
Spacer (86) as shown. Hold the Left Upright
Spacer and the Left Upright against the Base
(95). Tighten the M10 x 95mm Bolts (8) until the
heads of the Bolts touch the Left Upright; do not
fully tighten the Bolts yet.
86
85
8
95
90
9
8