Filter
Top Products
7
1
. Make sure that the power cord is unplugged.
W
ith the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the
Frame (56) so that the treadmill is more stable;
do not fully fold the Frame yet.
Cut the tie securing the Wire Harness (88) to the
Base (95). Next, locate a tie in the indicated hole
in the Base, and use the tie to pull the Wire
Harness out of the hole.
95
56
1
88
Hole
2. Attach two Base Feet (92) to the Base (95) in
the locations shown with two M4.2 x 25mm Tek
Screws (3) and two Base Foot Spacers (94).
Attach the other two Base Feet (92) with only
two M4.2 x 25mm Tek Screws (3).
95
3
92
2
92
3
3
92
3
92
94
94