Filter
Top Products
User's Reference Manual: Treadmill Safety Features 6
To turn the treadmill On and Off, use the power switch located
beneath the hood, near the power cord receptacle. Refer to the
following figure.
Turning the Treadmill On and Off
Entering the Safety Code
The fitness facility has the option to require a safety code. If the
safety code prompt appears, press the following number keys
sequence:
1,2,3,4.
An asterisk appears on the display with each key press. Hold onto
the handrail and straddle the running belt. The running belt starts
moving after a 3-second countdown.
Note: If the correct keys are not pressed within two minutes or you
press more than four numbers, the Precor banner appears on the
display and the running belt does not move.
Using the Stationary Handrails
To maintain your balance, always grasp a stationary handrail when
you step on or off the equipment and when you use the keypads.
To learn more about the touch-sensitive grips, refer to Heart Rate
Features.
Figure 2: Power switch location