Filter
Top Products
Attach Foot Pod on Shoe
To measure speed/pace and distance accurately,
make sure the foot pod is correctly positioned.
1.
Undo the flap and detach the foot pod from the
fork.
2.
Loosen your shoelaces and place the fork
underneath them, on top of the tongue of the
shoe. Tighten the laces.
3.
Fit the front part of the foot pod (closest to the
red button) to the fork and press from the rear
end. Fasten the flap. Make sure the foot pod
does not move and is aligned with your foot.
The more secure the sensor, the more
accurately speed and distance are measured.
4.
Turn the foot pod on before exercising. Press
and hold the red button on the foot pod until
the green light starts flashing.
5.
After exercising, turn the foot pod off by
pressing and holding the red button until the
green light switches off.
Optional calibration of the foot pod can improve
the accuracy of speed, pace and distance
measurements. For further information, see
Calibrate the Foot Pod in the User Manual.
ENGLISH
Prepare For Training 9