Filter
Top Products
60 – ENGLISH
5. Put the battery cover in its place and close it by
screwing the cover clockwise with a coin. Make sure that
the cover is closed properly!
Note: After a battery change re-enter time and date settings in
Basic Settings. For further information, see page 8.
WearLink+ Transmitter Battery
1. Using a coin, open the battery cover by
turning it counterclockwise to OPEN.
2. Insert the battery (CR2025) inside
the cover with the positive (+)
side against the cover. Make sure
the sealing ring is in the groove to ensure water
resistance.
3. Press the cover back into the connector.
4. Use the coin to turn the cover clockwise to CLOSE.