Filter
Top Products
FIGURE 11
STEP 11:
sure CABLE
is routed over bolt!
Route the 129-1/2" CABLE (7) through the TOP BOOM and the STACK BOOM (2) as shown in FIGURE
TIGttTEN any LOOSENED PULLEY connection after CABLE has been routed.
t8 X 2"
FIGURE 12
3/8 X 2.3/4,, ~(~’~
STEP 12:
¯ SECURELY assembletwo 3-1/2" PULLEYS (6) to the STACKBOOM (2) using two 3/8 X 2-3/4" BOLTS (13), 5/8" FLANGE SPACERS
(14), and two 3/8" LOCK NUTS (16) as shownin FIGURE 12. (NOTE: Make sure the cable is routed over ,all the pulleys.)
¯ TIGIITEN any LOOSENED PULLEY connection after CABLE has been routed.