Filter
Top Products
FIGURE 13
FIGURE 12
STEP 12
• Screw the threaded end of 82-1/2” CABLE (17) to the PULLEY
BRACKET (2) as shown in FIGURE 12.
STEP 13
• Attach one 3-1/2” PULLEY (5) to the FRONT LEG (1) and one 3-1/2” PULLEY (5) to the BASE CONNECTION (4) using two 3/
8 X 1-3/4” BOLTS (13) and two 3/8” LOCKNUTS (11). (Note: Make sure CABLE (17) is running under PULLEYS.)
9
2
17
5
3/8 X 1-3/4” 13
11
1
17
4