Filter
Top Products
6
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
STEP 8
Remove the existing LAT CABLE using the following steps:
• Unscrew the threaded end of CABLE from the HEAD PLATE ASSEMBLY.
• Route the LAT CABLE around the PULLEY BLOCK as shown in FIGURE 8.
REMOVE CABLE
FIGURE 8
• The pulleys in TOP BOOM may need to be temporarily removed to remove CABLE.
• Route the LAT CABLE around the TOP BOOM as shown in FIGURE 8.
• Disconnect LAT BAR from TOP BOOM.