Filter
Top Products
GB
SWITCHING BETWEEN OPERATION MODES
Press MODE to switch between the five operation modes: real-time clock,
alarm clock, user profile, SMART TRAINING PROGRAM, and stopwatch.
The modes are described in the sections that follow.
You can run the SMART TRAINING PROGRAM or stopwatch in the
background as you access other modes. The icon for the mode that is
running will flash until you switch back to that mode.
CHANGING THE SETTINGS
To change the any watch setting (such as time, alarm clock, user profile, etc.)
1. Press MODE to switch to the desired mode.
2. Press and hold SET until the first setting for that mode flashes.
3.
Press ST / SP / + to change the setting. Hold to speed through the options.
4. Repeat Steps 2 – 3 to change other settings for that mode.
USING THE CLOCK
USING THE REAL-TIME CLOCK
The real-time clock is the default display for the VIBRA-TRAINER PRO
watch, and tracks the time, date, month, and day of week. The clock is
programmed with a 50-year auto-calendar, which means you do not
need to reset the days of the week and dates each month.
Refer to the “Changing the Settings” section to set the real-time clock.
USING THE ALARM CLOCK
To activate the alarm, press SET while the alarm time is displayed. The alarm
icon will display whenever the alarm is set. When the feature is activated, a beep
will sound at the designated time each day. Press any button to stop the alarm. It
will ring at the same time the next day unless you turn the feature off.
6
SE112_Eng(24/04) 5/14/03, 4:04 PM7