Filter
Top Products
GB
22
PC KIT (RP109 ONLY)
The RP109 Oregon Scientific OUTBREAKER sports watch is
equipped with a PC Kit that includes a PC Docking Station and
CD-ROM for downloading information to a personal computer.
Full instructions for using the software are provided in the online
help and can be viewed once you have installed the CD-ROM.
The PC Kit for the RA109/RS109 series OUTBREAKER
watch is sold separately. Contact the retailer or our website
(www.oregonscientific.com) for more information about the
RZ910 PC Kit.
The PC Kit enables you to store and recall most of the
information that is collected by the OUTBREAKER watch. This
allows you to free up the watch memory for recording more
information, while preserving the training records that are most
important to you. For example, with the PC Kit you can specify
which information you want to record in TOUR Mode: By
limiting what is recorded, you can keep longer records. This
can be useful if you wish to monitor your performance during an
extended period such as a two-day hike, where only heart rate
and altitude are of concern, or a day of cycling, where only
speed and distance are important to you. Full details of the
watch’s memory capacity are given in the TOUR MEMORY
section.
You can also use the PC Hook-up Kit to set values on the watch
through the PC. A full list of options is given at the end of this
section.
The hardware/software requirements for the PC Kit are
listed at the back of this manual.
NOTE
NOTE
ACCESSING THE MODE OPTIONS
Press MODE to access the BIKE
Mode, then press SELECT/+ to loop
through the options: Speed, Stop-
watch/Timer, Temperature, Altitude,
and Heart Rate.
For instructions on how to use the
Stopwatch or Timer in BIKE Mode,
refer to pp. 9 – 10.
VIEWING SPEED AND CADENCE INFORMATION
Press MODE to switch to the BIKE Mode. In the Speed display,
you can view current speed (default view) and the following
metrics from memory: total time spent cycling, total distance
traveled, total TOUR distance traveled (TOUR Mode only, see
TOUR section), average speed, maximum speed, and ca-
dence (pedal revolutions per minute). Press FUNC/SET to loop
through the values for each option.
To clear a value from a specific memory, press and hold
FUNC/SET for 2 seconds.