Filter
Top Products
9
8. Attach a Pull-up Handle (18) to the Top Frame (4)
with four M10 x 20mm Button Bolts (83) and four
M
10 Washers (91).
S
lide a Top Arm Cap (20) over the Pull-up Handle
(18) and onto the Top Frame (4).
Press a 32mm Round Outer Cap (22) onto the
Pull-up Handle (18). Tighten an Eyebolt (23) into
the Pull-up Handle.
Repeat this step on the other side of the Top
Frame (4).
9. Attach the Upright Cap (21) to the Top Frame (4)
with an M4 x 20mm Self-tapping Screw (94) and
an M4 Washer (36).
Attach the Top Frame (4) to the Upright (3) with
two M10 x 98mm Button Bolts (98), four M10
Washers (91), and two M10 Nylon Locknuts (74).
83
83
83
83
8
9
4
20
22
91
4
91
91
23
18
21
94
36
74
98
3
91
91
91
91
10. Attach the Headrest (17) to the Upright (3) with
two M6 x 100mm Screws (71) and two M6
Washers (85).
10
85
85
71
17
3